Boatsparasailing Harness one of the parasailing equipment and they are manufactured in top quality, high tenacity polypropylene webbing and 316 marine quality stainless steel, thus ensuring that they can cope with the high demands placed on them by commercial parasailing operators.
The body harness is what the flyer sits in during the flight. It is comprised of a seating strap, lower back strap, an adjustable waist strap and two leg straps. It attaches to the risers via two stainless steel clips. All harnesses are constructed of mil-spec nylon webbing for maximum strength and durability.
Tandem another interesting parasailing equipment , a Tandem flight is the perfect way to enjoy your first flying experience.
Having a professional, highly qualified tandem pilot with you, will make this flight one you will never forget. As a passenger you merely have to run a few short meters, during the take off. The wind will inflate the glider, and off we are airborne!
Cloud Hoppers use a four riser configuration constructed of mil-spec nylon webbing. The suspension lines come down from the skirt of the canopy to connect to the risers via stainless steel rings. The lines are attached to the rings to prevent abrasion which promotes longer line life The two center lines are also attached to the risers by stainless steel rings. In addition the reinforced towing yoke is attached to the risers. The towing yoke is the place where the tow line from the boat is attached. The rear two risers are also referred to as the ‘steering straps’ and are used in steering the canopy right and left.
This parasailing equipment is used like the following each Cloud Hopper uses 16 heavy duty Dacron suspension lines that have been carefully measured, marked and attached to the canopy using the best possible attachment methods to ensure maximum strength. Dacron is used for the lines because it doesn’t absorb much water when wet and stretches very little under tension. In addition there are two extremely heavy duty Dacron center lines whose function is to pull the apex of the canopy down for increased stability.
Cloud Hoppers are available in different sizes, 24 foot, 26 foot, 28 foot, 32 foot 36 foot, 38 foot, 42 foot, 44 foot, and 46 foot. Each provides differing amounts of lift and is recommended for different maximum weight flyers. All canopies are constructed of type 6.6 ripstop nylon in the 1.9 ounce (per square yard) weight. The nylon is coated with urethane which contains U.V. inhibitors. This urethane coating helps the canopy from becoming water logged, brings the porosity of the fabric down to zero (for increased lift), and also helps protect it from damaging solar rays.
This is a list of the ropes we supply for Commercial boat use and for private enthusiasts. There is many types of towline that we have available for parasailing, the type for you will depend on a few factors. The type of parasail operation, the vessel type, the local conditions and the captain or operator preference.
Here are some of the hydraulic components we use in Commercial boat fit-outs and our Ski boat kit for private enthusiasts.